Sediment analysis and bed change calculation
We use HEC-RAS models to calculate where solid material goes in a stream or river, and which sections will erode and which will build up.
Request a quoteWhat sediment analysis is
Besides water, a river drags gravel, sand and silt. The analysis puts numbers on the size and amount of that material, where it comes to rest in the bed and where it wears the bed away.
Types of calculation
- 1D sediment transport
- Calculates the transport capacity of each cross section and follows how the bed level and the grain size of the bed material change over time.
- 2D sediment model
- In HEC-RAS 6.1 and later, solves sediment flux and bed change together on a two-dimensional mesh.
- Sediment yield and reservoirs
- Assesses the solid load arriving from the basin, how much of a reservoir will fill, and how check dams hold that load back.
- Bridge and structure scour
- Calculates pier scour, abutment scour and contraction scour with the FHWA HEC-18 method.
When it is needed
For river works, a bridge or culvert, a dam or pond, an intake or a gravel pit, the capacity of the structure on its first day is not enough on its own; the bed drops and rises over the years. The DSİ specification for river rehabilitation and flood protection works includes sediment transport studies in the scope of such projects.
Limits
We state the limits openly at the start. According to the USACE 1D manual, a movable-bed 1D model is not suitable for calculating pier and abutment scour; in that case we turn to the HEC-18 method. A hot start and a 1D-2D sediment coupling do not yet exist in the 2D sediment model. Where measured bed change is available we compare the model with it; where it is not, we give the result together with its uncertainty.
Tell us about your project
A location and a purpose are enough; we define the rest together.
Request a quote